M&M Honda Racing Aerobonnet Type MR3 (FRP) - CR-Z ZF1/2
$980.00
SKU
MM-01100-ZF1-MR003
It is an aero bonnet with three vents on the left and right sides of the bonnet. The vents are laid out in a flowing silhouette design that blends with the innovative lines of the CR-Z to create a fresh, urban feel. Type MR3 is made of all FRP material on the front and back. The back side has a black gelcoat finish, and the duct part has an inner protector that prevents rain and debris from entering, so it helps to keep the engine room clean with peace of mind even on rainy days. The FRP bonnet type MR has a reinforced back side in weight, and the bonnet striker is installed using the same installation method as the stock one. In consideration of safety, when driving on the street, you can use the genuine striker with confidence even without bonnet pins. However, when driving in sports such as circuit driving, the bonnet lock may come off due to wind pressure due to the lightweight bonnet, so it is recommended to use a bonnet pin together for safety. The FRP bonnet will be shipped unpainted, so please paint it.
It is an aero bonnet with three vents on the left and right sides of the bonnet. The vents are laid out in a flowing silhouette design that blends with the innovative lines of the CR-Z to create a fresh, urban feel. Type MR3 is made of all FRP material on the front and back. The back side has a black gelcoat finish, and the duct part has an inner protector that prevents rain and debris from entering, so it helps to keep the engine room clean with peace of mind even on rainy days. The FRP bonnet type MR has a reinforced back side in weight, and the bonnet striker is installed using the same installation method as the stock one. In consideration of safety, when driving on the street, you can use the genuine striker with confidence even without bonnet pins. However, when driving in sports such as circuit driving, the bonnet lock may come off due to wind pressure due to the lightweight bonnet, so it is recommended to use a bonnet pin together for safety. The FRP bonnet will be shipped unpainted, so please paint it.
| Manufacturer Product Code | 01100-ZF1-MR003 |
|---|---|
| Product Types | Interior & Exterior |
| Manufacturer | M&M Honda Racing |
| Model Year | 2011, 2012, 2013, 2014, 2015, 2016 |
| Make | Honda |
| Model | CR-Z |
| Item Description | It is an aero bonnet with three vents on the left and right sides of the bonnet. The vents are laid out in a flowing silhouette design that blends with the innovative lines of the CR-Z to create a fresh, urban feel. Type MR3 is made of all FRP material on the front and back. The back side has a black gelcoat finish, and the duct part has an inner protector that prevents rain and debris from entering, so it helps to keep the engine room clean with peace of mind even on rainy days. The FRP bonnet type MR has a reinforced back side in weight, and the bonnet striker is installed using the same installation method as the stock one. In consideration of safety, when driving on the street, you can use the genuine striker with confidence even without bonnet pins. However, when driving in sports such as circuit driving, the bonnet lock may come off due to wind pressure due to the lightweight bonnet, so it is recommended to use a bonnet pin together for safety. The FRP bonnet will be shipped unpainted, so please paint it. |
Check items to add to the cart or
-
![Cusco Front Sway Bar - CR-Z ZF1]()
Cusco Front Sway Bar - CR-Z ZF1$267.00 -
![Spoon Under panel Kit - CR-Z ZF1]()
Spoon Under panel Kit - CR-Z ZF1$520.00 -
![Spoon Aero Mirrors - CR-Z ZF1]()
Spoon Aero Mirrors - CR-Z ZF1$1,100.00 -
![Spoon Driveshaft Set - CR-Z ZF1]()
Spoon Driveshaft Set - CR-Z ZF1$2,850.00 -
![Spoon Air Cleaner - CR-Z ZF1]()
Spoon Air Cleaner - CR-Z ZF1$70.00
|
|