J's Racing Tsuchinoko Air Intake Chamber Kit (FRP) - Accord CL7 (Early)
$617.00
SKU
JS-TCB-E2-M
By placing the chamber and air filter part in the oblique heat cover that effectively utilizes the small amount of engine room space, it is possible to constantly take in fresh air without inhaling hot air in the engin
e room.
The included special air duct is set inside the bumper. Fresh air obtained from the inside of the bumper by this method passes through the inside of the fender, which is a large-capacity intake box with a special bulkhead plate and guides the ram air to the large-diameter air filter. It has also cleared the driving test in rainy weather with a lot of precipitation.
Power check was performed in the order of normal, external air cleaner, and tsuchinoko chamber. All vehicles are the same and the engine is normal. At this time, the performance test of the chamber body was conducted without sending the fan wind to the intake side. In addition to the power, please pay attention to the dramatic improvement in torque. In addition, the Tsuchinoko chamber, which greatly affects the running wind, promises to improve power and torque more than data by running.
Kit contains:
FRP oblique heat cover
FRP chamber body
FRP partition plate for FRP
Dedicated air duct
Filter joint
Dedicated air filter
Hoses
J'SRACING gold emblem
Joints
Bands/bolts
Installation instructions
Applicable models:
CL7-100, -110, -300, -310 Accord Euro R
CL9-100, -110 Accord early (K24)
CM2-100, -300 Accord wagon early
e room.
The included special air duct is set inside the bumper. Fresh air obtained from the inside of the bumper by this method passes through the inside of the fender, which is a large-capacity intake box with a special bulkhead plate and guides the ram air to the large-diameter air filter. It has also cleared the driving test in rainy weather with a lot of precipitation.
Power check was performed in the order of normal, external air cleaner, and tsuchinoko chamber. All vehicles are the same and the engine is normal. At this time, the performance test of the chamber body was conducted without sending the fan wind to the intake side. In addition to the power, please pay attention to the dramatic improvement in torque. In addition, the Tsuchinoko chamber, which greatly affects the running wind, promises to improve power and torque more than data by running.
Kit contains:
FRP oblique heat cover
FRP chamber body
FRP partition plate for FRP
Dedicated air duct
Filter joint
Dedicated air filter
Hoses
J'SRACING gold emblem
Joints
Bands/bolts
Installation instructions
Applicable models:
CL7-100, -110, -300, -310 Accord Euro R
CL9-100, -110 Accord early (K24)
CM2-100, -300 Accord wagon early
By placing the chamber and air filter part in the oblique heat cover that effectively utilizes the small amount of engine room space, it is possible to constantly take in fresh air without inhaling hot air in the engin
e room.
The included special air duct is set inside the bumper. Fresh air obtained from the inside of the bumper by this method passes through the inside of the fender, which is a large-capacity intake box with a special bulkhead plate and guides the ram air to the large-diameter air filter. It has also cleared the driving test in rainy weather with a lot of precipitation.
Power check was performed in the order of normal, external air cleaner, and tsuchinoko chamber. All vehicles are the same and the engine is normal. At this time, the performance test of the chamber body was conducted without sending the fan wind to the intake side. In addition to the power, please pay attention to the dramatic improvement in torque. In addition, the Tsuchinoko chamber, which greatly affects the running wind, promises to improve power and torque more than data by running.
Kit contains:
FRP oblique heat cover
FRP chamber body
FRP partition plate for FRP
Dedicated air duct
Filter joint
Dedicated air filter
Hoses
J'SRACING gold emblem
Joints
Bands/bolts
Installation instructions
Applicable models:
CL7-100, -110, -300, -310 Accord Euro R
CL9-100, -110 Accord early (K24)
CM2-100, -300 Accord wagon early
e room.
The included special air duct is set inside the bumper. Fresh air obtained from the inside of the bumper by this method passes through the inside of the fender, which is a large-capacity intake box with a special bulkhead plate and guides the ram air to the large-diameter air filter. It has also cleared the driving test in rainy weather with a lot of precipitation.
Power check was performed in the order of normal, external air cleaner, and tsuchinoko chamber. All vehicles are the same and the engine is normal. At this time, the performance test of the chamber body was conducted without sending the fan wind to the intake side. In addition to the power, please pay attention to the dramatic improvement in torque. In addition, the Tsuchinoko chamber, which greatly affects the running wind, promises to improve power and torque more than data by running.
Kit contains:
FRP oblique heat cover
FRP chamber body
FRP partition plate for FRP
Dedicated air duct
Filter joint
Dedicated air filter
Hoses
J'SRACING gold emblem
Joints
Bands/bolts
Installation instructions
Applicable models:
CL7-100, -110, -300, -310 Accord Euro R
CL9-100, -110 Accord early (K24)
CM2-100, -300 Accord wagon early
| Manufacturer Product Code | JS-TCB-E2-M |
|---|---|
| Product Types | Intake & Exhaust |
| Manufacturer | J's Racing |
| Model Year | 2002, 2003, 2004, 2005, 2006, 2007 |
| Make | Honda |
| Model | Accord |
| Item Description | By placing the chamber and air filter part in the oblique heat cover that effectively utilizes the small amount of engine room space, it is possible to constantly take in fresh air without inhaling hot air in the engin e room. The included special air duct is set inside the bumper. Fresh air obtained from the inside of the bumper by this method passes through the inside of the fender, which is a large-capacity intake box with a special bulkhead plate and guides the ram air to the large-diameter air filter. It has also cleared the driving test in rainy weather with a lot of precipitation. Power check was performed in the order of normal, external air cleaner, and tsuchinoko chamber. All vehicles are the same and the engine is normal. At this time, the performance test of the chamber body was conducted without sending the fan wind to the intake side. In addition to the power, please pay attention to the dramatic improvement in torque. In addition, the Tsuchinoko chamber, which greatly affects the running wind, promises to improve power and torque more than data by running. Kit contains: FRP oblique heat cover FRP chamber body FRP partition plate for FRP Dedicated air duct Filter joint Dedicated air filter Hoses J'SRACING gold emblem Joints Bands/bolts Installation instructions Applicable models: CL7-100, -110, -300, -310 Accord Euro R CL9-100, -110 Accord early (K24) CM2-100, -300 Accord wagon early |
Other Products You May Be Interested In
-
![Spoon Driveshaft Set - Accord CL7]()
Spoon Driveshaft Set - Accord CL7$2,390.00
![Spoon S-Tai Bumper [Front] - Accord CL7 2004.01-2008.12](https://gotuning.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/s/p/sp-71101-cl7-001_00.jpg)
![Spoon Brake Pad [Front] - Accord CL7](https://gotuning.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/f/r/front-brake-pad-cl7.jpg)
|
|
