ASM I.S. Design Front Aero Fenders -04 (Dry Carbon) - S2000 AP1/2
$5,740.00
SKU
ASM-AP100003/4
Developed and used on the ASM Tsukuba Special 2004. Each side is 25mm wider to allow for wider front wheels. A large vent behind the front wheel allows trapped air to escape. Because of the extra width, it is not flush with the front bumper. Therefore, a fender filler/spacer (included separate part) is provided so that the stock bumper can still be used. Due to the increased width, there are no tabs for the stock fender liner so trimming or removal is required.
Dry Carbon items come pre-prepped for paint. There is NO clear coat on them, so it is recommended that they need to be cleared or painted.
ASM Dry Carbon and Fiberglass products are designed and produced at the Challenge Technology Center in Japan. They are produced with the same approach to dry carbon products as OEM to many major Japanese car manufacturers using advanced manufacturing methods with pre-impregnated carbon materials. Design and production involve the use of CAD modeling, cutting plotters, 5-axis 3-D mills, high-pressure autoclaves, and water mills.
Dry Carbon items come pre-prepped for paint. There is NO clear coat on them, so it is recommended that they need to be cleared or painted.
ASM Dry Carbon and Fiberglass products are designed and produced at the Challenge Technology Center in Japan. They are produced with the same approach to dry carbon products as OEM to many major Japanese car manufacturers using advanced manufacturing methods with pre-impregnated carbon materials. Design and production involve the use of CAD modeling, cutting plotters, 5-axis 3-D mills, high-pressure autoclaves, and water mills.
Developed and used on the ASM Tsukuba Special 2004. Each side is 25mm wider to allow for wider front wheels. A large vent behind the front wheel allows trapped air to escape. Because of the extra width, it is not flush with the front bumper. Therefore, a fender filler/spacer (included separate part) is provided so that the stock bumper can still be used. Due to the increased width, there are no tabs for the stock fender liner so trimming or removal is required.
Dry Carbon items come pre-prepped for paint. There is NO clear coat on them, so it is recommended that they need to be cleared or painted.
ASM Dry Carbon and Fiberglass products are designed and produced at the Challenge Technology Center in Japan. They are produced with the same approach to dry carbon products as OEM to many major Japanese car manufacturers using advanced manufacturing methods with pre-impregnated carbon materials. Design and production involve the use of CAD modeling, cutting plotters, 5-axis 3-D mills, high-pressure autoclaves, and water mills.
Dry Carbon items come pre-prepped for paint. There is NO clear coat on them, so it is recommended that they need to be cleared or painted.
ASM Dry Carbon and Fiberglass products are designed and produced at the Challenge Technology Center in Japan. They are produced with the same approach to dry carbon products as OEM to many major Japanese car manufacturers using advanced manufacturing methods with pre-impregnated carbon materials. Design and production involve the use of CAD modeling, cutting plotters, 5-axis 3-D mills, high-pressure autoclaves, and water mills.
| Manufacturer Product Code | ASM-AP100003,4 |
|---|---|
| Manufacturer | ASM |
| Model Year | 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
| Make | Honda |
| Model | S2000 |
| Item Description | Developed and used on the ASM Tsukuba Special 2004. Each side is 25mm wider to allow for wider front wheels. A large vent behind the front wheel allows trapped air to escape. Because of the extra width, it is not flush with the front bumper. Therefore, a fender filler/spacer (included separate part) is provided so that the stock bumper can still be used. Due to the increased width, there are no tabs for the stock fender liner so trimming or removal is required. Dry Carbon items come pre-prepped for paint. There is NO clear coat on them, so it is recommended that they need to be cleared or painted. ASM Dry Carbon and Fiberglass products are designed and produced at the Challenge Technology Center in Japan. They are produced with the same approach to dry carbon products as OEM to many major Japanese car manufacturers using advanced manufacturing methods with pre-impregnated carbon materials. Design and production involve the use of CAD modeling, cutting plotters, 5-axis 3-D mills, high-pressure autoclaves, and water mills. |
Other Products You May Be Interested In
-
![ASM Monaco Mirror - S2000 AP1/2]()
ASM Monaco Mirror - S2000 AP1/2$310.00 -
![Spoon Air Cleaner - S2000 AP1]()
Spoon Air Cleaner - S2000 AP1$105.00
|
|
